RUBI | Dry Drilling in Ceramic, Porcelain, Natural Stone and Other Material | Operating Speed 14,000 r.p.m | DRYGRES Drill BIT (MÁX. Ø 83 MM.)

Main guide compatible with bits up to £ 83 mm. Ensures effective hole centring for drill bits from £ 6 to 12 mm. Can be used for wet or dry cutting. Suitable for all types of ceramic materials and / or natural stone with smooth surfaces. Fixing the guide is done through suction, directly onto the surface to be drilled, either horizontally or vertically. Chassis constructed from galvanised steel for increased resistance to wear and oxidation. Built-in hose connection for wet drilling tank (hose and tank ... - Manufacturers part numbers: 313FC|50944

• ⏰ The average life of the DRYGRES drill bits varies according to the diameter. In diameters of 6-12 mm the average life is 25 holes and in the DRYGRES from 20-75 mm the average life is 60 holes.
• 💧 DRYGRES diamond drill bits are made for dry cutting and can be used, thanks to their connection with a M14 thread, directly with a grinder or non-percussive power drill, by using the drill adaptor (ref. 05976).
• ⚠️ Maximum operating speed 14,000 rpm M14 thread finish. Usable with grinder (direct connection) or electric drill (adapter ref. 05976). Supplied in blister.
• 📏 For drilling holes in tiles. (MÁX. Ø 83 MM.)
• 💎 Diamond drill bits are made for dry cutting and can be used, thanks to their connection with a M14 thread, directly with a grinder or non-percussive power drill, by using the drill adaptor (ref. 05976).