KnightsBridge 50A DP pull cord switch [Part M Compliant]

50A DP pull cord switch [Part M Compliant]The wiring basics range has been expanded to include a range of wiring accessories that comply with current Building Regulations Part M. Where switches cannot be provided, pull cord switches should be set between 900mm and 1100mm above floor level and fitted with a minimum 50mm diameter bangle visually contrasting with its background and distinguishable visually from any emergency assistance pull cord. Benefits Inherent Anti-microbial properties €“ 3rd party tested [base only] Certified to all relevant British Safety standards Features 50A 230V Double pole Mechanical ON OFF indicator Neon indicator 2m grey cord Fitted with grey triangular bangle Technical Specification:Length: 85Width: 85Projection: 44Construction: Thermoset resinFinish: WhiteClass: IIIP Rating: IP20Primary Voltage: 230V 50HzSocket/Spur Control: SwitchedSwitch Type: Double PoleLoad/Max. Load: 50AEarth Terminal: YesNeon Indicator: YesFunction: Mechanical Switch with on/of... - Manufacturers part number: PM8310N

• TRUSTED - Founded in Dunstable, Bedfordshire in 1998, Knightsbridge has since established itself as one of the UK's leading importers and distributors of lighting products and electrical wiring accessories.
• UKCA certified and Anti Microbial properties 3rd Party Tested to ISO 22196:2011
• Certified to all relevant British Safety standards
• It is recommended that switches contrast with the front plate which in turn contrast with the wall. This range satisfies both recommendations. With a Light Reflectance Value (LRV) of approx. 8.9 (Part M recommends a contrast of 30% LRF between front plate and wall)
• The wiring basics range has been expanded to include a range of wiring accessories that comply with current Building Regulations Part M